Using Pulsa

Best practices, tips & tricks, troubleshooting, and how to replace batteries

Understanding cellular gateway lights

1

Startup & debug mode - blue & green blink

Pulsa gateway will display blue and green blinking lights simultaneously while starting up or in debug mode.

2

Cell detection - fast green blink

Pulsa gateway will display a fast green blinking light while starting up & looking for a cellular signal. Frequency of two blinks per second.

3

Pulsa sensor detection - slow green blink

While waiting for a reading from local Pulsa sensor(s), gateway will display a slow green blink. Frequency of one blink every two seconds.

4

Pulsa sensor detection (30minutes+) - slow green blink & fast red blink

If gateway has been waiting for a reading from a local Pulsa sensor for over 30 minutes, the gateway will display a slow green blink and a fast red blink. Frequency of two red blinks every second, and one green blink every two seconds.

5

Connected - solid green light

Once gateway is properly connected to a cellular signal and is transmitting Pulses from at least one Pulsa or sensor within the last half hour, your gateway will display a solid green light.

Related Articles

Get your inventory on track

Reach out for a starter kit or general sales and we’ll get back to you quickly.

888 · 259 · 1163